Exceptionally high ground motions (horizontal peak ground acceleration (PGA) of 1.82g) were recorded at the Tarzana Station during the main shock of the 1994 Northridge earthquake (moment magnitude 6.7 at an epicentral distance of 6 km). At the time of the main shock, the instrument was located near the edge of a 21 m-high ridge with side slopes ranging from 3H:1V to 15H:1V. The ridge is underlain by shallow fill and soft rocks of Medelo Formation.
The objectives of this study were to (1) identify the relative contributions of various factors such as local geology, topography, source mechanism, and travel path on the large ground motions recorded at Tarzana Station and (2) develop an analytical model that could adequately predict observed ground motions at the Tarzana site during the Northridge earthquake and at similar sites during future earthquakes. This study is an integral part of a series of inter-related studies referred to as the ROSRINE research (Resolution of Site Response Issues during Northridge Earthquake) project.
The PGA at the surface of competent bedrock (1 km/s shear wave velocity found about 100 m below ground surface) is estimated by Silva [ROSRINE Study (2000)] at 0.46 gravity (g). To identify the source of ground motion amplification, one-dimensional (
), two-dimensional (TELDYN and SASSI), and three-dimensional (SASSI) analyses were conducted using both recorded aftershock data and an estimated ground acceleration time histories at a 100 m depth.
The results of the analyses indicate that (1) local geology and topography could only partially account for the observed ground motion amplification, and (2) the PGA and response spectra at a point near the edge of the ridge (the location of the instrument at the time of the main shock) is in good agreement with recorded values when the angle of incident of shear waves (SV waves) at 100 m depth is assumed at 30° from vertical. Considering the local geology and variation of shear wave velocity with depth, the 30° incident angle at 100 m depth corresponds to an 8° incident angle of shear waves at the ground surface. This observation is, in general, consistent with the incident angles of shear waves reported from study of the recorded aftershock data. 相似文献
The site amplification is estimated at five seismic stations of the Latur region using the horizontal to vertical spectral ratios of 33 aftershocks of the main Killari earthquake of September 29, 1993 (UTC). Spectral amplifications, ranging from a factor of 2–6 are found to vary with frequency at different places. Significant amplification is found at four sites within the Latur region, at Basavakalyan, Kasgi, Killari, and Mudgad Eakoji villages. Our results show a positive correlation between the site amplification and the damage pattern in area. The pattern and the nature of the site amplification estimated in the present study corroborates also with the analytical models and the borehole data indicating alternating layers of unconsolidated sediments and basaltic rocks. 相似文献
Major concentrations of Al2O3, Fe2O3, MgO, CaO, Na2O and K2O, minor levels of TiO2, P2O5 and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO3/HClO4 acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials. 相似文献
Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations. 相似文献
